I. Operation rules of CNC planing machine:
1. It is necessary for the operator to understand the operation manual of the machine tool and the function and structure of the machine tool.
2. Before starting the machine, check whether all parts of the machine are intact and normal and whether the safety protection equipment of the machine is solid according to the rules of the spot inspection card.
3. Refueling according to the smooth time rule, check whether the oil standard, oil quantity, oil quality and oil line are normal, insist on the smooth system clean, oil tank and oil hole shall not be opened.
4, it is necessary for the operator to operate the machine in strict accordance with the operation process of the CNC machine tool, without the consent of the operator, other personnel shall not start.
5. Press the keys with moderate force, and do not press the keyboard, keys and display screen.
6. No other items are allowed on the working table.
7, the machine attack trouble or abnormal phenomenon should be immediately parking check, eliminate.
8. The operator should park the car when leaving the machine tool, changing the speed, replacing the tool, measuring the size and adjusting the workpiece.
9. After the end of the operation, all parts of the machine shall be in the original condition and the power shall be cut off.
10. Properly keep the machine tool accessories, and insist that the machine is neat and intact.
11. Do a good job in cleaning machine tools, insist on cleaning, carefully carry out the handover procedures, fill in the handover records.
Ii. Safety regulations of CNC grooving machine:
(1) Workers should wear tight working clothes and tie the cuffs tightly; Lesbians wear helmets.
(2) Check whether all parts and safety equipment are safe and reliable before operation; Check whether the safety and reliability of the electrical part of the equipment is outstanding.
(3) When the machine is working, it is not allowed to adjust and measure the workpiece and change the smooth method, in case the hand touches the tool and bruises the finger.
(4) Do not remove the waste by hand in the operation.
(5) When unloading the working parts, the clamps shall be retreated to a safe position.
(6) Special gaskets should be used when assembling and disassembling molds to prevent bruising.