9. Before production, pre-trial production shall be carried out. After continuous inspection of multiple finished products and confirmation of compliance with the requirements, formal production shall be carried out.
10. Be careful in the operation process. The work clothes should be fastened and avoid the knife edge.
11. Check frequently whether all parts are worn or do not meet the requirements, and repair or replace them in time if necessary.
Pay attention to machine maintenance and lubrication. (1) Ensure the oil level of the tank, and drip regularly. (2) The feeder transmission slider should be refueled once per shift. (3) The connecting gears should be lubricated frequently. (4) The operating bearing should be repaired every six months to once a year and filled with calcium base butter. (5) The regulating vortex rod should be lubricated regularly.
13, each shaft to keep clean, often wipe with oil.
After the completion of production according to the prescribed program stop, and then cut off the power supply.